Before committing to purchasing or shipping your boat, please ensure you have taken into account all of the below points. If you can’t provide one of these documents then please contact us to discuss before committing to purchase your boat. As some of these are pre-requests to importing, and without them you can’t import your boat.
Import Approval - (Boats with Trailers ONLY)
All boats on trailers must have an import permit for the trailer prior to arriving in Australia, you will need to apply for this directly to the Department of Infrastructure.
You must have this permit approved for your trailer before the yacht arrives in Australia, if you don’t then your yacht or boat won’t be able to be removed from the port and will incur storage charges which could cost you thousands of dollars.
Bill of Sale
If purchasing your boat, we will need a copy of the Bill of Sale from the seller. If you already own the boat, then we need a copy of the original purchase Bill of Sale.
If this has been misplaced then it will need to have a valuation done on arrival.
Boats with Wooden Cradles
If your boat is not on its own trailer, then it will require a cradle to be carried on any vessel. We can construct a custom cradle for your boat from either steel or timber, depending on your hull design. If your yacht comes with its own cradle, or you are commissioning a bespoke cradle elsewhere, it needs to be either steel, or ISPM15 compliant timber, or fumigation fees and cradle destruction will apply on arrival into Australia.
2 forms of photo id are required for Australian Customs. i.e. Passport photopage and drivers licence.
Air Conditioning / Refrigeration
Boats will on-board refrigeration or air conditioning will need to have them degassed and decommissioned prior to export, a certificate from the company involved is also required with your documents. It’s important to do this to avoid expensive pre-charged equipment licenses on arrival.
Wash and de-foul your boat
Its very important that the boat is spotless both inside and out. All dirt etc on the tariler needs to be water blasted off, and the hull should be clean and free of any organic matter, such as barnicals etc. The inside should be washed and vacuumed so there is no dirt or leaves etc inside the boat. This includes engine bays and hatches.
All used boats are inspected by DAFF on arrival, and only after this inspection is the cleanliness condition known. Due to this we can’t quote the cleaning costs. Further inspection and cleaning may be required as instructed by DAFF, and are not included in this quotation.
Quarantine is the biggest unknown cost because it’s impossible for us to know the condition of your boat when we quote for shipping. We allow in our quotes a single inspection charge, if as a result of the inspection a problem is found then any washing or fumigation is additional. It’s a good idea to have the seller make sure the yacht is as clean as possible, if it is very dirty then often it won’t be allowed on the ship, though we can take care of cleaning it at the port as an additional charge.
Have you taken out Marine Insurance?
Not compulsory, but worth asking us for a quote. Your road insurance will not cover any damage that may occur while in transit.
Have you taken into account GST/Duty?
Import GST and Duties are payable in addition to any quotation we provide, GST is 10% and Duty is based on the country of manufacture. Boats manufactured in the USA are duty free if accompanied with an appropriate Certificate of Origin. Also see next section.
Boat title / Ownership papers
Depending on the country of purchase, and in some cases the state, the boat wil have a title or ownership paper.
Certificate of Origin
If importing a boat from a country with a free trade agreement, in order to import free of Duty, you will need to have a Certificate of Origin completed by either the dealer or the manufacture. The certificate must be based on wording as per this Sample Certificate of Origin.
Outside your Boat
Consider removing anything that will reduce the overall volume of your yacht like swim platforms, radar arches, flybridges, keels and bowspirits. The smaller you can make your boat the lower the shipping price will normally be.
Hatches should be tightly secured and sealed with tape to prevent damage from wind/sea driven water and prevent the hatch from coming open while in transit.
Inside your Boat
Make sure all items have been battened down securely including hatches, the open sea can have some tremendous forces that do considerable damage if something comes loose.
Check all drain plugs, there should be no water in the bilge as this becomes a quarantine issue on arrival.
The batteries should be disconnected and the cables tied off to prevent contact.
Drain the fuel and water tanks as much as possible, ensuring the tank is no more than 1/4 full. If your boat is being shipped during winter months then water should be drained from water systems, pumps and air conditioners.
If you have ticked off all of the above, then your boat is ready to ship to Australia. Congratulations and enjoy happy boating!